# Lug width vs strap width: odd sizes, taper and why a 20 mm strap may still not fit

**URL:** <https://superreps.net/t/lug-width-vs-strap-width-odd-sizes-taper-and-why-a-20-mm-strap-may-still-not-fit/31845>\
**Category:** Newbie Corner\
**Tags:** guide\
**Created:** [November 16, 2026, 10:15am UTC](https://superreps.net/t/lug-width-vs-strap-width-odd-sizes-taper-and-why-a-20-mm-strap-may-still-not-fit/31845 "2026-11-16T10:15:40Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![strapfiend](https://superreps.net/user_avatar/superreps.net/strapfiend/32/307_2.png) [@strapfiend](https://superreps.net/u/strapfiend)\
**Post date:** [November 16, 2026, 10:15am UTC](https://superreps.net/t/lug-width-vs-strap-width-odd-sizes-taper-and-why-a-20-mm-strap-may-still-not-fit/31845/1 "2026-11-16T10:15:40Z")

</div>

A strap listing says “20 mm”. The watch says nothing. Plenty of strap questions start like that, so here is the buying side of it, in one place.

**Lug width** is the inside gap between the two lugs, at the point where the **spring bar** sits. It decides the width of the strap **at the watch end**. It says nothing about the width at the buckle, the thickness, or whether the case takes a normal strap at all.

Three things this thread covers:

1. **Odd widths** (19, 21 mm) are real, and the case size does not warn you.
2. **Taper** : the strap gets narrower towards the buckle, so the **buckle** has to match the **buckle-end** width, not the lug width.
3. Why “ **close enough** ” (20 on 21, 22 on 21) tends to look wrong.

How to read the measurement in someone’s QC photos is a separate question, covered in [How to read watch measurements: diameter, lug to lug, thickness and lug width](https://superreps.net/t/watch-measurements-diameter-lug-to-lug-thickness-lug-width-qc/31736).

[[PHOTO: close-up of the gap between two watch lugs with the strap removed, calipers set at the spring-bar holes, the reading shown in millimetres]]

Not sure about a strap width for your watch? Create an account and ask the community.

_Editorial summary, not independently verified._

---

<div class="post-metadata">

**Author:** ![gilt\_fiend](https://superreps.net/user_avatar/superreps.net/gilt_fiend/32/266_2.png) [@gilt\_fiend](https://superreps.net/u/gilt_fiend)\
**Post date:** [November 16, 2026, 10:15am UTC](https://superreps.net/t/lug-width-vs-strap-width-odd-sizes-taper-and-why-a-20-mm-strap-may-still-not-fit/31845/2 "2026-11-16T10:15:59Z")

</div>

Okay, naive question. If my reading is 21 mm, a 20 mm strap is only 1 mm off. Who would even see that?

---

<div class="post-metadata">

**Author:** ![claspfiles](https://superreps.net/user_avatar/superreps.net/claspfiles/32/309_2.png) [@claspfiles](https://superreps.net/u/claspfiles)\
**Post date:** [November 16, 2026, 10:16am UTC](https://superreps.net/t/lug-width-vs-strap-width-odd-sizes-taper-and-why-a-20-mm-strap-may-still-not-fit/31845/3 "2026-11-16T10:16:17Z")

</div>

You would. A strap 1 mm too narrow leaves a visible **gap at each side** of the lugs. One that is 1 mm too wide has to be squeezed in: it **bunches against the lugs** and the spring bar may **not seat properly** in its holes.

The usual workarounds are all bad ideas:

- **forcing** a strap or bar in (marks the lugs, bends the bar);
- **trimming** the strap edges (removes the edge finish, cannot be undone);
- **filing** the lugs (permanently changes the case).

If a strap is one size off, the fix is a strap in the right width.

---

<div class="post-metadata">

**Author:** ![gilt\_fiend](https://superreps.net/user_avatar/superreps.net/gilt_fiend/32/266_2.png) [@gilt\_fiend](https://superreps.net/u/gilt_fiend)\
**Post date:** [November 16, 2026, 10:16am UTC](https://superreps.net/t/lug-width-vs-strap-width-odd-sizes-taper-and-why-a-20-mm-strap-may-still-not-fit/31845/4 "2026-11-16T10:16:32Z")

</div>

Fine. But are 19 and 21 mm watches actually common, or is my reading just off?

---

<div class="post-metadata">

**Author:** ![braceletgeek](https://superreps.net/user_avatar/superreps.net/braceletgeek/32/289_2.png) [@braceletgeek](https://superreps.net/u/braceletgeek)\
**Post date:** [November 16, 2026, 10:16am UTC](https://superreps.net/t/lug-width-vs-strap-width-odd-sizes-taper-and-why-a-20-mm-strap-may-still-not-fit/31845/5 "2026-11-16T10:16:51Z")

</div>

They exist, and the case diameter will not tell you. A few published widths from the makers’ own specifications: the **NOMOS Tangente 38 (ref. 166)** is **19 mm** , the **Tissot Gentleman T127.407.11.041.00** is **21 mm** , and the **Omega Speedmaster Dark Side of the Moon 311.92.44.51.01.005** is **21 mm** , while the **Moonwatch Professional 310.30.42.50.01.001** is **20 mm**. Same family name, different width. A half reading such as **20.5 mm** is usually the calipers catching a **chamfer** or the curve inside a lug: check the maker’s figure for the exact reference, measure again with the strap off at the spring-bar position, and measure a strap that already fits well across its very end.

---

<div class="post-metadata">

**Author:** ![minutetracklab](https://superreps.net/user_avatar/superreps.net/minutetracklab/32/303_2.png) [@minutetracklab](https://superreps.net/u/minutetracklab)\
**Post date:** [November 16, 2026, 10:17am UTC](https://superreps.net/t/lug-width-vs-strap-width-odd-sizes-taper-and-why-a-20-mm-strap-may-still-not-fit/31845/6 "2026-11-16T10:17:10Z")

</div>

On **taper** , which trips people up at the other end:

- The strap is usually **narrower at the buckle** than at the lugs. Common pairings for odd widths are **19 mm to 16 mm** and **21 mm to 18 mm**.
- The **buckle end is never wider** than the lug width.
- Your **buckle** (or deployant) has to match the **buckle-end width**. A 21 mm watch with a 21-18 strap needs an **18 mm** buckle, not a 21.
- Taper also changes how the strap looks on the wrist, so compare the buckle-end width, not only the lug width.

[[PHOTO: two straps of the same lug width laid side by side, one tapering from 21 mm to 18 mm and one straight, with the buckle-end width marked on each]]

Changing it without scratching the lugs is its own topic: [Changing a watch strap without scratching the lugs: spring bars and lug width](https://superreps.net/t/change-watch-strap-without-scratching-lugs-spring-bars-lug-width/419).

---

<div class="post-metadata">

**Author:** ![tick\_whisperer](https://superreps.net/user_avatar/superreps.net/tick_whisperer/32/302_2.png) [@tick\_whisperer](https://superreps.net/u/tick_whisperer)\
**Post date:** [November 16, 2026, 10:17am UTC](https://superreps.net/t/lug-width-vs-strap-width-odd-sizes-taper-and-why-a-20-mm-strap-may-still-not-fit/31845/7 "2026-11-16T10:17:28Z")

</div>

And the cases where width is not even the main question:

1. **Integrated bracelets** and **fitted end links** : the case is shaped for its own bracelet, so a generic strap may not sit flush. See [Oyster and Jubilee bracelets on reps: the clasp, Glidelock, Easylink and end links](https://superreps.net/t/oyster-jubilee-bracelet-rep-qc-clasp-glidelock-easylink-end-links/352).
2. **Screw bars** or **tubes** instead of spring bars: the strap has to suit the bar. If you are unsure what holds a bracelet in the first place, [screw, split pin or tube: how to tell what holds the links](https://superreps.net/t/screw-split-pin-or-tube-what-holds-bracelet-links/31768) walks through it.
3. **Spring bars and thickness** : the bars have to seat fully in the lug holes, and thickness at the lugs is a separate measurement from width.

---

<div class="post-metadata">

**Author:** ![strapfiend](https://superreps.net/user_avatar/superreps.net/strapfiend/32/307_2.png) [@strapfiend](https://superreps.net/u/strapfiend)\
**Post date:** [November 16, 2026, 10:18am UTC](https://superreps.net/t/lug-width-vs-strap-width-odd-sizes-taper-and-why-a-20-mm-strap-may-still-not-fit/31845/8 "2026-11-16T10:18:00Z")

</div>

Summary:

1. **Lug width** = the inside gap at the spring-bar position, measured with the strap off. Order **exactly** that width at the watch end.
2. **Odd widths** are normal on some references (19 and 21 mm), whatever the case size. Trust the maker’s figure for the exact reference over a single reading.
3. **One size off** (20 on 21, 22 on 21) means gaps or a pinched strap. Do not force, trim or file anything.
4. **Taper** : the buckle matches the **buckle-end** width (21-18 strap, 18 mm buckle).
5. **Before ordering** : width at the lugs, width at the buckle, thickness at the lugs, spring-bar type, and whether the case is made for its own bracelet.

_Editorial summary, not independently verified._

---

<div class="post-metadata">

**Author:** ![gilt\_fiend](https://superreps.net/user_avatar/superreps.net/gilt_fiend/32/266_2.png) [@gilt\_fiend](https://superreps.net/u/gilt_fiend)\
**Post date:** [November 16, 2026, 10:18am UTC](https://superreps.net/t/lug-width-vs-strap-width-odd-sizes-taper-and-why-a-20-mm-strap-may-still-not-fit/31845/9 "2026-11-16T10:18:18Z")

</div>

Thanks strapfiend, claspfiles, braceletgeek, minutetracklab and tick\_whisperer. Measuring again with the strap off before ordering anything.
