The Alpine Eagle is Chopard’s integrated-bracelet sports watch, a reread of the St. Moritz. On QC photos, three areas cover almost the whole check: the bezel and its screws, the textured dial and the bracelet.
What reviews of the original show:
- A round bezel, held by eight screws grouped in pairs at 12, 3, 6 and 9 o’clock.
- An angular case, with two protrusions at 3 and 9; those at 3 protect the screw-down crown. Flat brushed surfaces, polished edges. Water-resistant to 100 m.
- A dial with a radiating texture inspired by the eagle’s iris, Roman numerals at the cardinal points, baton hands with lume.
- Sizes: 41 mm and 36 mm.
[[PHOTO: Alpine Eagle 41 mm vue de face, flèches sur les huit vis de lunette groupées par paires à 12, 3, 6 et 9 h et sur les chiffres romains du cadran]]
Not sure about a screw-in bezel? Create an account and ask the community.
Editorial summary, not independently verified.
Basic question: on the photos I’m looking at, the screw slots don’t all point the same way. Is that a flaw?
Not necessarily, and that is actually an interesting detail on this model.
- On the original, the slots are neither identical nor random: they are set tangent to the bezel circle, so they follow its curve. Two screws in the same pair therefore do not point in exactly the same direction.
- What matters in QC: an even gap between the two screws of each pair, the four pairs well centred on 12, 3, 6 and 9, and heads at the same height, with no scratches in the slots.
- What would look wrong: slots pointing just any way from one pair to the next, or a pair shifted relative to the index.
Tip: a straight-on photo, without flash, shows the slot orientation much better than a shot from an angle.
OK. And the dial? In my photos it looks like a classic sunburst.
That is the trap. The “eagle iris” texture is stamped: on the fir-green version, a review explains that the brass disc is stamped before the PVD is applied. The relief is deeper than a normal sunburst, and under flat light it can look like a simple brushing.
In the photos, look for:
- rays that start cleanly from the centre, with no blurred or flattened area;
- an even pattern around the Roman numerals;
- the chapter ring with its dots and dashes for the minutes, well aligned.
Ask for a photo with raking light from the side: the relief should show up. Colour itself changes a lot with the lighting, so compare it with reference photos taken in similar conditions.
[[PHOTO: gros plan du cadran Alpine Eagle sous lumière rasante, flèches sur la texture rayonnante, le centre du motif et le rehaut avec points et traits]]
The bracelet next, since it is the heart of this kind of watch:
- Each link is an ingot topped by a raised central cap; brushed sides, polished cap. In photos, the border between brushed and polished should be sharp and even from one link to the next.
- The bracelet tapers toward the clasp, which is a folding clasp.
- One review describes figure-of-8 pins in each link: invisible in a photo, only visible when the bracelet is taken apart.
On the 41 mm, reviews give 9.7 mm thickness, 47 mm lug to lug and about 53 mm “effective” with the first link. For how an integrated bracelet wears on the wrist, this thread helps: integrated bracelet on the wrist: Royal Oak and Nautilus in 37, 39 or 41 mm.
Two useful comparisons in the same register. The Ingenieur 40 also has bezel screws and an integrated bracelet, with its own rules: IWC Ingenieur Automatic 40 QC: the grid dial, the five bezel screws and the integrated bracelet. And for another integrated bracelet with a very distinctive bezel: Overseas 4500V QC: Maltese-cross bezel, blue dial and straps.
On the movement side: the original 41 mm uses calibre 01.01-C (4 Hz, 60 h, COSC chronometer), the 36 mm the 09.01-C (42 h). The sapphire caseback shows the architecture, not how it runs: you need a video and a few days on the wrist.
Recap:
- Bezel screws: eight, in pairs at 12, 3, 6 and 9; slots tangent to the bezel, so not all parallel. Check the gap, the centring of the pairs and the state of the slots.
- Dial: stamped “eagle iris” texture, deeper than a sunburst; judge it with raking light.
- Case: brushed surfaces, polished edges, screw-down crown between the protrusions at 3 o’clock.
- Bracelet: ingot links with a polished cap, brushed sides, tapering bracelet; sharp brushed/polished border.
- Dimensions (41 mm): 9.7 mm thickness, 47 mm lug to lug, about 53 mm effective.
- What photos cannot show: how the bracelet feels, any play between the links, how the movement runs.
Editorial summary, not independently verified.
Thanks trotteuse_rebelle, cadran_discret, couronne_curieuse and la_tocante. So the “not parallel” slots were normal; I’m asking for the raking-light photo of the dial.