TL;DR: on a Cloudmonster, the sole is the shoe. Check the pods and the side profile first, the upper second, and do not treat wear stories as QC tells.
What the release coverage and reviews of the original describe:
- Midsole: CloudTec with the biggest Cloud elements On had made at launch, shaped into a rocker, with a Speedboard plate inside and Helion foam.
- Pods: hollow, so they compress and open back up with each step. In photos, they are open cut-outs, not printed shapes.
- Upper: a reflective look, but mostly recycled polyester mesh; an asymmetrical tongue; recycled materials make up roughly 30% of the shoe, per the launch coverage.
- Outsole: a mix of textured rubber and exposed foam, with modest rubber coverage.
The detail people skip: compare the whole row of pods, heel to toe, on both shoes, rather than zooming into a single pod. The row as a whole is a better comparison point.
[[PHOTO: Cloudmonster lateral side view, arrows on the row of hollow CloudTec pods from heel to toe, the rocker curve and the mesh upper]]
Not sure about a sole profile? Create an account and ask the community.
Editorial summary, not independently verified.
Okay, total newbie here! How do I even know if the photos show the first Cloudmonster or the Cloudmonster 2? They look the same to me??
Shape: the Cloudmonster 2 looks virtually identical at a glance, but it has more CloudTec under foot (the most of any On running shoe when it launched), so the stack reads taller. Side-by-side profile shots are the only fair comparison.
Materials: the 2 has a meatier upper with more height, to balance the thicker sole.
Stitching: not a version tell; check for even overlay edges instead.
Tags: the 2 carries “ON RUNNING” printed on the upper, on top of the other On logos at the heel, tongue and toe box.
Verdict: lettering on the upper points to the 2. Say which version the photos show before comparing with any reference.
That helps so much! And for the sole itself, what counts as a flaw?
Score-style breakdown, out of 10 for usefulness in QC photos:
- Pod cut-outs (9/10): open, clean edges, no foam skin left inside the holes, the same rhythm on both shoes.
- Rocker profile (8/10): heel and toe curve up evenly; compare left and right shoes side by side at the same height.
- Speedboard (3/10): it sits inside the sole, so photos rarely show it. Do not mark a pair down because it is invisible.
- Outsole (6/10): textured rubber pads and exposed foam areas should sit where the reference shows them.
- Glue lines (7/10): the joins between upper and midsole should be tight, with no shiny glue spreading onto the mesh.
Summing up so far: profile and pods first, then the joins.
One review said the soles wore down fast. Should I look for that in QC?
Verdict: no. Details after.
That is a myth worth debunking for QC. In one lab review, some testers reported early outsole wear and early delamination of the upper’s overlays after running in the shoe. That is something that shows up with use, on retail pairs too. A clean, new pair cannot show it, and a pair should not get an RL for a problem that only appears after miles of running.
What photos can show instead:
- overlays that are already lifting at the edges;
- uneven glue around the toe and heel;
- pods that are misshapen or partly closed.
Another max-cushion shoe with a rocker, checked the same way: HOKA Bondi QC: max-cushion midsole, Meta-Rocker and mesh. The basics of reading any sneaker QC set: first time reading sneaker QC photos.
[[PHOTO: close-up of the Cloudmonster toe and forefoot, arrows on the upper overlay edges, the glue line at the midsole join and the open pod cut-outs]]
TL;DR summary:
- Version first: “ON RUNNING” printed on the upper and a taller stack point to the Cloudmonster 2; compare only with the right reference.
- Pods: hollow, open cut-outs; check the whole heel-to-toe row and clean edges on both shoes.
- Rocker: even curve at heel and toe, left and right shoes matching.
- Upper: recycled polyester mesh, asymmetrical tongue, overlays flat at the edges.
- Outsole: textured rubber plus exposed foam, in the reference layout.
- Not a QC tell: wear after running. Not in photos: bounce, grip on wet roads, the Speedboard.
A general checklist for any pair: a QC checklist that works for any item. When a flaw is worth an RL: GL vs RL: what they mean, and when a flaw is worth an RL.
Editorial summary, not independently verified.
Thanks rustyaglet, sole_sleuth, outsolenerd and stitchdownlogic! Version first, pods and profile next, and no RL for wear that has not happened yet. Super clear!